Contact Form

Send your inquiry to Wuxi Rolls Excavator Parts Factory,China manufacturer.

Contact Info

Strict quality process control and management ensures
product quality and accountability.


Email : ROLLSBREAKE[email protected]


Worktime : 08:30-17:30 (Beijing Time)


  • Types of Pile Driving Equipments

    Application. Advantages. Disadvantages. Consist of massive weight ranges from 2500 to 20000Kg with a cylinder shape, and the power source would lift the hammer to specified height then the power is cut to drop the hammer and hit pile helmet. Maximum hammer height is 1.37m and no higher 1.2m in case of heavy pile.

  • PVE

    After placing a pile driving frame, the sheet piles are driven by a crane, arig or excavator mounted vibratory hammer. The vibratory hammer is positioned on top of the sheet pile with clamps. It produces a sine-wave vertical pressure and the energy of the hammer will quickly drive the pile into the soil. The critical frequency is overruled by

  • 8 Types of Construction Piles and Pile Cutting Guide [Tips]

    When the concrete is over the ground, it will run over from the pile head on execution and because of the tremie method the upper section is comprised of weaker concrete which should then be trimmed. When the pile is under the ground, the concrete level should ideally be made 1m longer to provide length to cut-off the weak concrete.

  • Benefits of Driven Piles | Pile Driving Contractors

    A driven pile is a relatively long, slender column, provided to offer support or to resist forces, made of preformed material having a predetermined shape and size that can be physically inspected prior to and during installation, which is installed by impact hammering, vibrating or pushing into the earth.

  • Australian Pile Croppers | Concrete Pile Reduction

    Mounted to a 360 degree excavator, pile croppers are used in all sectors of the construction industry, from housing to commercial, public to private, to utilities, road and rail. When lowered onto the pile itself, the hydraulic system operates the jaw(s) which allows the pile cropper to cut the pile and cause the concrete to break away, leaving a level finish as a result.

  • Types of Pile Driving Equipments

    Application. Advantages. Disadvantages. Consist of massive weight ranges from 2500 to 20000Kg with a cylinder shape, and the power source would lift the hammer to specified height then the power is cut to drop the hammer and hit pile helmet. Maximum hammer height is 1.37m and no higher 1.2m in case of heavy pile.

  • Pile Driving Basics, Common Problems, and Solutions

    The helmet is a temporary steel cap placed on top of the pile used to, as much as possible, protect the head during driving. Pile Cushion. A pile cushion is typically made of wood. It is placed between the helmet and the pile. Types of Pile Drivers. There are several types of pile drivers, including: Vibratory Hammer. Vibratory hammers cut soil rather than drive piles using a spinning technique and counter-weight system. They are powered by hydraulic motors.

  • Vulcan, Underwater and Hydraulic Hammers – vulcanhammer.info

    The initial tests showed promise but Vulcan's difficulties in the mid-1990's put an end to this effort. More information on the Raymond hydraulic hammers can be found in the Vulcanhammer.info Guide to Pile Driving Equipment. Another was the Sermec hydraulic impact hammer, developed in the North of England.

  • SideTool Wood Splitter

    On top of that, you can stack the wood in a pile instead of having to carry them around by hand. The wood splitter attaches to the hydraulic or non-hydraulic thumb of the mini-excavator. Optimal size machines are in the 3-6 metric ton range, although we do have customers who operate the wood splitter with as small as a 1.5-ton machine or as

  • Pile Driving Basics, Common Problems, and Solutions

    Pile Driving Basics, Common Problems, and Solutions - Pile Buck Magazine. Volume 37 Issue 4. August 19, 2021. Volume 37 Issue 3. June 22, 2021. Volume 37 Issue 2. April 16, 2021. Volume 37 Issue 1. March 2, 2021.

  • Decommissioning Methodology and Cost Evaluation

    Decommissioning Methodology and Cost Evaluation BPA No. E13PA00010 Call Order No. E14PB00056 Prepared for U.S. Department of the Interior Bureau of Safety and Environmental Enforcement

  • 5. FLOW OF WATER THROUGH SOIL

    As shown by equation (5.2) the hydraulic gradient (i) is obtained by dividing the head loss ( ∆h) by the length (L) over which this head is lost. In the case of horizontal seepage the head loss is entirely a loss in pressure head. In the case of seepage down a hill the ∆h is derived from a loss of elevation.

  • ENGINEERING CONTROL: SLURRY WALLS

    The trenches are usually dug with a hydraulic excavator. Clamshell diggers are necessary for deeper (greater than approximately 80 ft) installations. Typically, trenches built using this method are 3 ft wide. Vibrating beam: A second method of excavation is via a vibrated steel beam attached to a pile driver.

  • Hup Hong Machinery (S) Pte Ltd | One Stop Centre For

    1 system, multiple applications! For manual and automatic cutting. NP 18 LTX BL 5.0. Cordless rivet gun for extremely fast riveting. Battery Link Monitoring Tool. Smart monitoring and management tool for the battery via Bluetooth. GC-EL 3000 E. Electric leaf vacuum with powerful 3000W rating power. SUPERIOR PLASMA 100.

  • China Hydraulic Breaker Hammer suppliers, Hydraulic Breaker Hammer

    hammer Seatbelt Cutter glass Window Breaker Escape LifeSaving Hammer Tool US$ 3. Hydraulic Post Installation Highway Guardrail Pile Driver/Pile Hammer US$ 20000 - 30000

  • Section 5

    Michigan is the tri-cone roller bit. The type and number of cutting teeth on the bit cones vary depending upon the type of formations to be penetrated. The upper end of the drill stem is attached to a kelly on a table drive rig and swivel which are mounted on a large mast. Hydraulic controls lower or raise the drill stem and operate the rotary

  • REED Cutter

    Reed Universal Pipe Cutter (UPC) makes the in-ditch cut for a municipal water project. The UPC handles tough cuts in the trench, underwater or aboveground. Built to cut 6” - 48” nominal diameter (150-1300 mm O.D.) ductile iron, cast iron, clay,

  • HyPrecision™ Predictive waterjet pumps

    HyPrecision Predictive waterjet pumps (S series) Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

  • TAETS | Pilebreaker.com

    TAETS | Pilebreaker.com - Home. NO.1. The Taets Hydraulic pilebreaker is the most advanced, efficient and time-saving system in the world for trimming concrete foundation piles. Working with the pilebreaker results in a perfect horizontal finish, undamaged reinforcement and no cracks below cut-off level. Break 200 piles a day!

  • Australian Pile Croppers | Concrete Pile Reduction

    Mounted to a 360 degree excavator, pile croppers are used in all sectors of the construction industry, from housing to commercial, public to private, to utilities, road and rail. When lowered onto the pile itself, the hydraulic system operates the jaw(s) which allows the pile cropper to cut the pile and cause the concrete to break away, leaving a level finish as a result.

  • Practical Considerations in Pump Suction Arrangements

    An important aspect of pump hydraulic system design is the suction or inlet conditions. Disregard for proper allowances can result in vortices, cavitation, and loss of prime. Pumps do not force liquids through inlet or suction piping, but rather create lowered pressures at the suction nozzle which in turn in-duces the fluid to enter. Any design