Contact Form

Send your inquiry to Wuxi Rolls Excavator Parts Factory,China manufacturer.

Contact Info

Strict quality process control and management ensures
product quality and accountability.


Email : [email protected]


Worktime : 08:30-17:30 (Beijing Time)


  • HELICAL PILE – American Ground Screw

    LENGTHS • 600 – 4,500mm, 2 – 15ft DIAMETERS • 50 – 450mm, 2 – 18in WALL thickness • 2 – 10mm

  • Hot dip galvanized ground screws for solid foundation. Stop

    Screw piles have a very wide range of applications. They can be used in all types of soils - sandy, peaty, clayey soils and high water levels. Thanks to the high-quality hot-dip galvanized steel, the foundations of the S235 screw pile are stable and secure. Hot-dip galvanizing process ensures ground screw long term service life.

  • SCREW PILES | Pile Drive

    Screw piles are manufactured using varying sizes of tubular hollow sections for the pile or anchors shaft. Fabricated from 350-400 grade steel, the shafts have either single or multiple helix plate welded at their base with an attack bit attached for the ease of soil penetration. The pile shaft transfers a structure’s load into the pile.

  • Screw Piles

    The screw pile foundation is a fast and easy method for strong foundations with a wide variety of construction applications. The Helix screw pile is a manually installed pile which uses a crow bar or installation kit. It is especially suitable for small buildings, decking, fences and piers, and has a relatively effortless installation process.

  • Ground screw for solid foundations

    Ground screw, earth screw, screw anchor, earth anchor or pier anchor - this simple and effective foundation has many names. Stop Digging's ground screw works the same way as a concrete post or pier block, whilst outperforming it across the board. With our helical screws you can quickly and easily set out a stable foundation and begin construction immediately.

  • Screw Piles

    Similar to a giant screw, the piles are driven into the ground using specialized equipment and are anchored into place thanks to a helix plate situated at the bottom of the shaft. The piles can therefore securely support structures such as houses, patios, garden sheds, fences and much more.

  • HELICAL PILE – American Ground Screw

    LENGTHS • 600 – 4,500mm, 2 – 15ft DIAMETERS • 50 – 450mm, 2 – 18in WALL thickness • 2 – 10mm

  • Vermeer PD10 Pile Driver

    With precise ground drive control, operators can spend less time installing each pile, and move efficiently from one pile to the next. Take control Dual joystick controls help to implement the above-mentioned features in the fastest and most accurate way.

  • GoliathTech Screw Piles | Quite Simply Superior

    Resembling a large screw, screw piles are installed deep into the ground, beneath the ground freezing level, to solidly support the structure of your project. This is an advantageous alternative to form tubes and is less expensive than concrete foundations. Opt for a simple and rapid installation, without excavating.

  • Screw Pile / Anchor Drive Accessories

    The telescopic piling and drilling extension effectively increases you reach for added drilling depth and helical pile installation. Engineered for drive heads up to 16,000 ft-lbs, this skid steer mount provides 12ft - 16 ft of ground clearance for helical piers or augers (depending on skid steer size and drive head size).

  • Krinner ground screws

    E 140x1300-E76-100. E 140x1600-E76-100. The F-series ground screws are equipped with round or square flanges. The fixation of the bearing object made possible by this ensures the highest possible stability and safety, even with large or extreme structural loads. F 76x800-R. F 76x1000-R. F 76x1300-R. F 76x1600-R.

  • Chapter 5: The Heavy Hammers of Pile

    The large weight drives the pile into the earth. It is raised like a hammer and then, when it reaches the designated high point, it is released and the force of it falling drives the pile into the ground. Pile drivers can be static or mobile, depending on the amount of force needed and requirements of the job site.

  • Screw piers, Pile caps and Houses

    An excavator pushes it into the ground and the screw turns into the ground and you can see it’s displacing the ground a little bit. The pier pushes a little bit of dirt out of the way. Not a lot of dirt but still as it drives into the ground or is driven into the ground it creates this layer of loose soil as it goes in.

  • Groundhog Anchor and Support System 5000 LB Screw Pile | The

    3. Warranty ends after five (5) years. 5000 LB Screw Pile The Groundhog Anchor Support System Model #812 is a heavy-duty helical steel screw pile foundation used to support and/or tie down structures such as decks, sunrooms, boathouses, balconies, docks, cement pads, trailer homes, jobsite trailers and grade beams to name a few.

  • DIY Ground Screw Foundation

    Drive the guide rod approx. 8″/ 200mm deep. Then remove the rod and place your ground screw in the opening. Put the steel rod through the screw and use it to drive the screw in as deep as necessary. Put a metal fastener on the top of your ground screw if needed. Stake out the position of the futurefoundation carefully.

  • Ground screw driver

    Electrical professional ground screw driver GSD-20 2600 N.M. We also provide delivery of goods to the specified address. When choosing a delivery to the specified address, our manager will contact you to clarify the delivery details. All values are approximate and can be used just as values for initial calculations. Test load tests are mandatory!

  • Sizes / lengths of Screw pile foundation – solid steel

    The screw pile is a fast and effortless method of foundation for all kind of small building. In several cases, the screw pile has turned out to be the best choice for do-it-yourself builders. The manually installed screw pile is screwed into the ground using, for example, an iron bar or some other lever arm. The ma-

  • Screw piles for cold climate foundations (Conference) | ETDEWEB

    The pile is screwed into the ground with a planetary drive head of suitable torque rating. The helical plate or helix helps facilitate the installation of the pile and gives the screw pile increased bearing capacity and pull-out resistance over a traditional straight-shaft pile. Screw piles were compared against cast in place concrete piles and

  • DIY Ground Screw Foundation

    Drive the guide rod approx. 8″/ 200mm deep. Then remove the rod and place your ground screw in the opening. Put the steel rod through the screw and use it to drive the screw in as deep as necessary. Put a metal fastener on the top of your ground screw if needed. Stake out the position of the futurefoundation carefully.

  • Pile Drilling Machine | Screw Pile Driver | Piling Driving

    Pile Drilling Machine Screw Pile Driver. The screw pile driver is a kind of pile driving equipment that drives the drill pipe bit through the powerhead to make holes in the underground drilling machine. The screw pile driver can be divided into two parts: the pile frame and the drilling part. Working Principle of the Screw Pile Driver:

  • Screw Pile / Anchor Drive Accessories

    The telescopic piling and drilling extension effectively increases you reach for added drilling depth and helical pile installation. Engineered for drive heads up to 16,000 ft-lbs, this skid steer mount provides 12ft - 16 ft of ground clearance for helical piers or augers (depending on skid steer size and drive head size).