Contact Form

Send your inquiry to Wuxi Rolls Excavator Parts Factory,China manufacturer.

Contact Info

Strict quality process control and management ensures
product quality and accountability.


Email : [email protected]


Worktime : 08:30-17:30 (Beijing Time)


  • Bolted Joint Design | Fastenal

    The tensile load a fastener can withstand is determined by the formula P = St x As. P = Tensile load - a direct measurement of clamp load (lbs., N) St = Tensile strength - a generic measurement of the material's strength (psi, MPa) As = Tensile stress area for fastener or area of material (in², mm²)

  • Fracture Resistance of Advanced High

    The fracture resistance of different advanced high-strength steel (AHSS) sheets for automotive applications is investigated through conventional tensile tests, fracture toughness measurements, and hole expansion tests. Different fracture-related parameters, such as the true fracture strain (TFS), the true thickness strain (TTS), the fracture toughness at crack initiation (w e i ), the specific

  • Mining by rock cutting in narrow reefs

    tests, in Austria, on a sample block of UG2 reef. The reef was sourced from the Anglo Platinum Mine, Union Section, it had a low uniaxial compressive strength of 26 MPa; the sample also contained waste bands of pyroxenite with a UCS of 110 MPa. However, the Cherchar abrasivity index for the chromite ore was 5.4. This is an

  • EXTRUSION BLOW MOLDED MANHOLE COVER WITH TACK

    mastered to achieve tolerances as low as 1/32 inch [5]. It also provides great strength especially in tension, with a tensile strength of up to 60000 psi. [6]. Specifications for cast-iron covers are also readily available since they have been made out of the same material for years. Most

  • L

    Integrated Mounting Hole Heavy-Duty Cable Tie, Black Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 382mm (15 Inches), Width of 7.6mm (0.3 Inch), Thickness of 1.8mm (0.07 Inch), Tensile Strength Rating of 540 Newtons (120 Pounds), #10 Screw for Mounting, 100 Pack

  • EXTRUSION BLOW MOLDED MANHOLE COVER WITH TACK

    mastered to achieve tolerances as low as 1/32 inch [5]. It also provides great strength especially in tension, with a tensile strength of up to 60000 psi. [6]. Specifications for cast-iron covers are also readily available since they have been made out of the same material for years. Most

  • Stoping

    2.4 Engineering Application. A surface mine was underlied mined-out areas by room-and-pillar stoping method. The harmonic mechanical load was acting on the center of the roof surface of the mined-out areas; its vibration frequency is 0.1 Hz and load density is 0.29 MPa.

  • SUBMERSIBLE DATALOGGING LEVEL TRANSDUCER

    Address. Baum Publications Ltd. 124-2323 Boundary Rd, Vancouver, BC V5M 4V8 Canada Phone. 604-291-9900 Toll Free: 1-888-286-3630 Fax: 604-291-1906

  • Technical DaTa SheeT lexan (Pc) Polycarbonate

    D638 Tensile Strength (psi) 9,500 19,000 D638 Tensile Modulus (psi) 320,000 - D638 Tensile Elongation at Break (%) 60 10

  • Biomechanical study of a newly developed continuous double

    nicant dierence was found in ultimate tensile strength and cyclic testing to failure. Ultimate tensile strength e ultimate tensile strength are shown in Table 1. e mean of the ultimate tensile strength in the double modi-ed Kessler technique (group1) and the continuous double knots technique (group 2) were 25.90± 7.11 (N)

  • Shelter tool kit

    295 x 225mm +/-15mm. Hole diameter: front side 36mm, back side 40mm, +/-5%. Weight: 1kg +/- 50g, without handle. Strength testing: - Using a fitted, standard hardwood handle, clamp the blade of the shovel near the handle in a horizontal position. Gradually apply a load of 45kg and maintain it for 2 minutes.

  • Stoping

    2.4 Engineering Application. A surface mine was underlied mined-out areas by room-and-pillar stoping method. The harmonic mechanical load was acting on the center of the roof surface of the mined-out areas; its vibration frequency is 0.1 Hz and load density is 0.29 MPa.

  • Seymour Hercules Digger

    Description. The Seymour Hercules Digger delivers high tensile strength and is ideal for most industrial and commercial applications. The digger comes with a handle of 4 feet length that gives maximum control over the digger without much effort and is made with Structron Brand Fiberglass. The handle emphasizes a cushioned grip for maximum comfort.

  • Pipe Renewal

    What sets us apart is not only the continuation of a quality cured in-place liner with the same benefits, service life, and tensile strength of all our liners, but the inclusion of Insignia® Hydrophilic End Seals. LMK Pipe Renewal is proud to offer and install End Seals in conjunction with all sectional liners that terminate at the manhole.

  • Blind rivet technology | KVT

    Austria. Tel.: +43 732 257700.these lockbolts offer exceptionally high joint strength and high shear and tensile strength. Huck® fasteners are used in a wide

  • S38. Mole net. Tenax

    Dig the soil around the zone to be protected. The hole must be approximately 110 cm deep, and as wide as needed to install the mesh; The mesh must reach a depth of 1 m in the hole. The flexibility and lightness of the maxi rolls (1.00×200 m) make this procedure easier; Cover the hole with soil

  • L

    Integrated Mounting Hole Heavy-Duty Cable Tie, Black Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 382mm (15 Inches), Width of 7.6mm (0.3 Inch), Thickness of 1.8mm (0.07 Inch), Tensile Strength Rating of 540 Newtons (120 Pounds), #10 Screw for Mounting, 100 Pack

  • L

    Integrated Mounting Hole Heavy-Duty Cable Tie, Black Polyamide (Nylon 6.6) for Temperatures up to 85 Degrees Celsius (185 F) for Indoor Applications, Length of 382mm (15 Inches), Width of 7.6mm (0.3 Inch), Thickness of 1.8mm (0.07 Inch), Tensile Strength Rating of 540 Newtons (120 Pounds), #10 Screw for Mounting, 100 Pack

  • Tensile Testing Lab

    The Tensile Testing Lab at Applied Technical Services offers a wide range of tensile analysis capabilities for our clients. Our technicians employ methods that can determine samples’ mechanical performance characteristics, giving clients a better understanding of their materials’ quality and strength.

  • Mechanisms of strength and stiffness improvement of paper

    be negative for the tensile strength of paper (Nord-stro¨m 2016). However, because the shortening of the fibers leads to a better formation (Bither and Water-house 1992), it has sometimes been found to have a positive effect on the strength of paper (Abitz and Luner 1989), in particular in paper with longer fibers (Biermann 1996).

  • Mining by rock cutting in narrow reefs

    tests, in Austria, on a sample block of UG2 reef. The reef was sourced from the Anglo Platinum Mine, Union Section, it had a low uniaxial compressive strength of 26 MPa; the sample also contained waste bands of pyroxenite with a UCS of 110 MPa. However, the Cherchar abrasivity index for the chromite ore was 5.4. This is an